Reference Guide
interface
Configure a physical or logical interfaces on the switch.
C9000 Series
Syntax
interface interface range [group interface]
Parameters
interface Enter one of the following keywords and slot/port, pe-id /
stack-unit or number information:
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then the slot/port information. The range is from 0 to
16383.
• For a Management Ethernet interface, enter the keyword
managementethernet then the slot/port information.
• For a null interface, enter the keyword null then the
slot/port information. The Null interface number is 0.
• For a Port Channel interface, enter the keyword port-
channel then the port-channel ID. Range is from 1 to
128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a Tunnel interface, enter the keyword tunnel then
the tunnel ID. The range is from 1 to 16383.
• For a VLAN interface, enter the keyword vlan then the
slot/port information. The range is from 1 to 4094.
• For a port extender Gigabit Ethernet interface, enter the
keyword peGigE then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id
range is from 1 to 48.
group interface (Optional) Enter the keyword group to configure an
interface group. You can create a interface group by adding
a comma or hyphen separate list of the following interface
types:
• fortyGigE for a 40–Gigabit Ethernet interface.
• gigabitethernet for a GigabitEthernet interface.
• peGigE for a PE Gigabit Ethernet interface.
• TengigabitEthernet for a 10-Gigabit Ethernet
interface.
• vlan for a VLAN interface.
Interfaces
873