Reference Guide

Example (peGigE-
Single Range)
This example shows single range configuration for PE Gigabit Ethernet ports.
Dell(conf)#interface range pegigE 1/0/3-14
Dell(conf-if-range-pegi-1/0/3-14)#
Example (Multiple
Range)
This example shows how to use commas to add different interface types to the
range enabling all 10-Gigabit Ethernet interfaces in the range 2/1 to 2/23 and both
10-Gigabit Ethernet interfaces 1/1 and 1/2.
Dell(config-if)# interface range tengigabitethernet 2/1-23,
tengigabitethernet 1/1-2
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example (Multiple
Range)
This example shows how to use commas to add VLAN and port-channel interfaces
to the range.
Dell(config-if)# interface range tengigabitethernet 2/1-23,
tengigabitethernet 1/1–2,
Vlan 2–100, Port 1–25
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Related
Commands
• interface port-channel — configures a port channel group.
• interface vlan — configures a VLAN interface.
• show config (from INTERFACE RANGE mode) — shows the bulk configuration
interfaces.
• show range — shows the bulk configuration ranges.
• interface range macro (define) — defines a macro for an interface-range.
interface range macro (define)
Defines a macro for an interface range and then saves the macro in the running configuration.
C9000 Series
Syntax
define interface range macro name interface , interface , ...
Parameters
name Enter up to 16 characters for the macro name.
interface,
interface,...
Enter the keywords interface range and one of the
interfaces — slot/port, pe-id/stack-unit/port-id, port-
channel, or VLAN number. Select the range of interfaces for
bulk configuration. You can enter up to six comma-
separated ranges. Spaces are not required between the
commas. Comma-separated ranges can include VLANs,
port-channels, and physical interfaces.
Slot/Port information must contain a space before and after
the dash. For example, interface range
Interfaces
881