Reference Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced
Usage Information
To view the show output for multiple ports of a specified slot at a time, you can
specify any random port number or a range of ports, or a combination of both.
To specify a port range, you can enter a hyphenated range of one or more port
range values separated with commas; for example, show interfaces
dampening FortyGigE 1/0-4,7,9-11. To enter any random number of ports,
you can enter a comma-separated string of port numbers, for example show
interfaces dampening FortyGigE 1/0/1,9,11
NOTE: The port-range option is only available for 1 Gigabit Ethernet, 10-
Gigabit Ethernet, 40-Gigabit Ethernet, Fast Ethernet, FC, Port Channel, and
VLAN interfaces.
Example show
interfaces
dampening
(peGigE)
Dell#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse
Suppress Max-Sup
State
PeGi 255/1/1 Up 0 0 20 200
800 80
PeGi 255/1/2 Up 0 0 20 200
800 80
PeGi 255/1/3 Up 0 0 20 200
800 80
PeGi 255/1/4 Up 0 0 20 200
800 80
PeGi 255/1/5 Up 0 0 20 200
800 80
PeGi 255/1/6 Up 0 0 20 200
800 80
PeGi 255/1/7 Up 0 0 20 200
800 80
PeGi 255/1/8 Up 0 0 20 200
800 80
PeGi 255/1/9 Up 0 0 20 200
800 80
PeGi 255/1/10 Up 0 0 20 200
800 80
PeGi 255/1/11 Up 0 0 20 200
Interfaces
917