Reference Guide

linecard slot-id Enter the linecard slot-id parameters to specify the
switch ports on a line card. The range of slot IDs is from 0 to
11.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.2.1.0 Added support for 4093 VLANs on E-Series ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Support added for hybrid port/native VLAN, introduced on
the S Series.
7.5.1.0 Introduced on the C-Series.
Usage Information
To view the switchport information for multiple ports of a specified slot, you can
specify any random port number or a range of ports, or a combination of both.
To specify a port range, you can enter a hyphenated range of one or more port
range values separated with commas; for example, show interfaces
tengigabitethernet 10/0-1 switchport
NOTE: The multiple port range value is supported only for the Gigabit
Ethernet, 10-Gigabit Ethernet, 40-Gigabit Ethernet, Fast Ethernet, FC, Port
Channel, and VLAN interfaces.
The following describes the show interfaces switchport command for the
following example.
Items Description
Name Displays the interface’s type, slot, and port number.
932
Interfaces