Reference Guide

clear isis
Restart the IS-IS process. All IS-IS data is cleared.
C9000 Series
Syntax
clear isis [vrf vrf-name] [tag] {* | database | traffic}
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of
the VRF to restart the IS-IS process corresponding to that
VRF.
tag (Optional) Enter an alphanumeric string to specify the IS-IS
routing tag area.
* Enter the keyword * to clear all IS-IS information and restart
the IS-IS process. This command removes IS-IS neighbor
information and IS-IS LSP database information and the full
SPF calculation is done.
database Clears IS-IS LSP database information.
traffic Clears IS-IS counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
980
Intermediate System to Intermediate System (IS-IS)