Reference Guide

clns host
Define a name-to-network service mapping point (NSAP) that you use with commands that require
NSAPs and system IDs.
C9000 Series
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP
mapping.
nsap Enter a specific NSAP address that is associated with the
name parameter.
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information To configure a shortcut name that you can use instead of entering a long string of
numbers associated with an NSAP address, use this command.
Related
Commands
hostname dynamic — enables dynamic learning of host names from routers in the
domain and allows the routers to advertise the host names in LSPs.
debug isis
Enable debugging for all IS-IS operations.
C9000 Series
Syntax
debug isis
Intermediate System to Intermediate System (IS-IS)
981