Reference Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Introduced.
Usage Information
You can assign a name to a routing process so a prefix list IS applied to only the
routes derived from the specified routing process.
Related
Commands
• distribute-list in — filters the networks received in updates.
• redistribute — redistributes routes from one routing domain to another routing
domain.
distribute-list redistributed-override
Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the
network.
C9000 Series
Syntax
distribute-list redistributed-override in
To return to the default, use the no distribute-list redistributed-
override in command.
Defaults none
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
994
Intermediate System to Intermediate System (IS-IS)