Setup Guide

SD Flash File System Stress Test is Passed
ssdFlashFileSystemStressTest ................................ PASS
LEVEL 2 DIAGNOSTIC
ipcTrafficTest .............................................. FAIL
--------- Group Test Statistics ---------
Cpu Name : CP00
Total : 30
Passed : 22
Failed : 8
Aborted : 0
Elapsed time : 00H:01M:01S
Stop reason : after completion
------ Failed tests (level, times) ------
CpuGbeLinkStatusTest (0, 1)
hgLinkStatusTest (0, 1)
i2cTest (0, 1)
opticEepromTest (0, 1)
opticPresenceTest (0, 1)
udfLinkStatus (0, 1)
xeLinkStatusTest (0, 1)
ipcTrafficTest (2, 1)
-------------------------------------------------------------------
The following example shows the show diag in control processor command.
Dell#show diag cp unit detail
Diag status of CP unit:
--------------------------------------------------------------------------
Board: C9010 Dell Networking
=================================================
CP unit is currently offline.
CP unit alllevels diag issued at Sun Apr 26, 2015 10:32:01 PM.
Current diag status : Card diags are done.
Duration of execution (Total) : 4 min 0 sec.
Diagnostic test results located: flash:/TestReport-CP-unit.txt
Last notification received at Sun Apr 26, 2015 10:36:01 PM
--------------------------------------------------------------------------
DELL DIAGNOSTICS-C9000-CP00 [0]
CpuType -- RPM-CP
PPID -- CN0CKKCP7793149U0047
PPID Rev -- X00
Service Tag -- 154RG02
Part Number -- 0CKKCP
Part Number Revision -- X00
RPM CPLD -- 33
RPM extended CPLD -- 32
SW Version -- 1-0(0-4854)
Available free memory: 1,357,742,080 bytes
LEVEL 0 DIAGNOSTIC
biosVerGetTest .............................................. PASS
328
Debugging and Diagnostics