Setup Guide
• Kernel core dump — the central component of an OS that manages system processors and memory allocation and makes these
facilities available to applications. A kernel core dump is the contents of the memory the kernel uses at the time of an exception.
• Application core dump — the contents of the memory allocated to a failed application at the time of an exception.
System Log
Event messages provide system administrators diagnostics and auditing information.
The Dell Networking OS sends event messages to the internal buer, all terminal lines, the console, and optionally to a syslog server. For
more information about event messages and congurable options, see Switch Management.
Control Plane Redundancy
The switch eliminates single points of failure by providing dedicated or load-balanced redundancy for various components.
To congure redundancy features, use the following commands.
Table 35. Commands to congure Control Plane redundancy
Command Description
redundancy auto-failover-
limit
Limits the number of failovers for a specic period.
redundancy primary (rpm0
| rpm1)
Select preferred RPM as primary.
redundancy disable-auto-
reboot pe all
Prevents all the PEs from automatically rebooting when the switch fails.
redundancy disable-auto-
reboot pe id stack-unit
Prevents all the PEs in a stack from automatically rebooting when the switch fails.
redundancy disable-auto-
reboot
Prevents the system from automatically rebooting when the switch fails.
show redundancy
Displays the current redundancy conguration.
Control-Plane Failover
Control-plane failover is the process of the standby RPM becoming the primary RPM.
The system automatically fails over to the standby RPM when:
1 Communication is lost between the standby and primary RPM.
2 You remove the primary RPM.
You can perform a manual failover by entering the redundancy force-failover rpm command.
To display the reason for the last control-plane failover on the chassis, enter the show redundancy command in EXEC Privilege mode.
Dell# show redundancy
-- RPM Status --
------------------------------------------------
RPM Slot ID: 0
Control Plane Redundancy Role: Primary
RPM State: Active
RPM SW Version: 1-0(0-4095)
Link to Peer: Up
424
High Availability (HA)