Setup Guide

When you upgrade a standalone system to OS 10.0(0.0) and then connect a PE later, there might be a mismatch between the
versions. In this situation, the PE remains oine and the system displays the following:
Dell#
Apr 3 05:47:19: %RPM1-P:CP %DOWNLOAD-6-VERSION_MISMATCH_INFO: Received checkin from PE 200.
Expected version = 9-10(0-60) checkin version = 9.9(0.0)
Apr 3 05:47:20: %RPM1-P:CP %DOWNLOAD-6-UPGRADE_PROGRESS: PE 200 firmware auto sync is in
progress.
Apr 3 05:47:21: %RPM1-P:CP %BRM-5-PE_UNIT_DOWN: PE:200 Unit:2 Unit MAC:f8:b1:56:00:02:8a is
operationally down.
Apr 3 05:47:22: %RPM1-P:CP %BRM-5-BRM_LOG_PE_UNIT_VALIDATE_ERROR: PE:200 Unit:2 is in error:
SW and CAM ACL Validation error state.
Dell#show pe brief
-- Port Extenders Information --
----------------------------------------------------------
PE-id Status Stack-size Type System-MAC
----------------------------------------------------------
200 offline 1 C1048P f8:b1:56:00:02:8a
Dell#show pe 200
Codes: A - Active, I - Inactive
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Offline Reason: UNP - Unit Not Present,
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
PE-ID assigned: 200
Status: offline
System Mac: f8:b1:56:00:02:8a
PE Up Time: 00:00:00
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 0/22(A),Te 0/23(A)
Cascade LAG: Po 458(Up)
------------------------------------------------------------------------
Stack-id Status Reason Type UnitMac No. of Ports
------------------------------------------------------------------------
2 error SVM C1048P 00:00:00:00:00:00 52
Dell#
Dell#show pe errors
PE-id: 200
PE MAC: f8:b1:56:00:02:8a
PE Unit Errors:
PE Unit:2, Error Reason: SW Mismatch
Dell#
The PE goes for an auto-synch to get upgraded to the version that matches the CB. Once synched, the PE comes up online.
Dell#Apr 3 05:52:49: %RPM1-P:CP %DOWNLOAD-6-UPGRADE: PE 200 auto upgrade result - upgrade
success, initiating reset.
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/22
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/23
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Po 458
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/23
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/23
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/23
Apr 3 05:54:57: %RPM1-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:02:8a is detected on cascade
port:TenGigabitEthernet 0/22.
Apr 3 05:54:57: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Po 458
Apr 3 05:54:57: %RPM1-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:02:8a is detected on cascade
port:TenGigabitEthernet 0/23.
Apr 3 05:55:01: %RPM1-P:CP %BRM-5-PE_UNIT_UP: PE:200 Unit:2 Unit MAC:f8:b1:56:00:02:8a is
operationally up.
Apr 3 05:55:01: %RPM1-P:CP %BRM-5-PE_UP: PE:200 MAC:f8:b1:56:00:02:8a is operationally up.
Port Extenders (PEs)
779