Setup Guide
Suspending Power Delivery on the Port Extender
You can temporarily disable and then restore power on the port extender. For information about how to restore power to the port extender,
see Restoring Power Delivery on the PE.
To disable inline power on the port extender, use the following command. When you use this command, the inline power to all the ports on
the port extender are disabled.
• Disable inline power on the port extender.
EXEC privilege mode
power inline suspend pe pe-id stack-unit unit-number
– pe pe-id — Specify the port extender ID. The range is from 0 to 255.
– stack-unit unit-number — Specify the stack unit number of the port extender. The range is from 0 to 7.
Example of Suspending Power Delivery on the Port Extender
Dell#power inline suspend pe 0 stack-unit 0
Example of Displaying Suspended Power Delivery on the Port Extender
Dell#power inline suspend pe 0 stack-unit 0
Dell#
Dell#show power inline pe 0 stack-unit 0
% Error: Power to StackUnit 0 of PE 0 is in suspended state.
Restoring Power Delivery on the Port Extender
You can temporarily disable and then restore power on the port extender. For information about how to disable power delivery, see
Suspending Power Delivery on the Port Extender.
To restore inline power on the port extender, use the following command. When you restore the inline power to the port extender, the
control bridge (CB) pushes the port extender PoE congurations again to the port extender.
• Restore inline power on the port extender.
EXEC privilege mode
power inline restore pe pe-id stack-unit unit-number
– pe pe-id — Specify the port extender ID. The range is from 0 to 255.
– stack-unit unit-number — Specify the stack unit number of the port extender. The range is from 0 to 7.
Example of Restoring Power Delivery on the Port Extender
The following example disable power delivery on the port extender.
Dell#power inline restore pe 0 stack-unit 0
Example of Displaying Restored Power Delivery on the Port Extender
Dell#show power inline pe 0 stack-unit 0
Global inline power Threshold: 99
Power Reserved for inline Power:841W
Total Inline Power Consumed: 0W
828
Power over Ethernet (PoE)