Setup Guide

router authentication strings, VRRP authentication by obscuring this information. Passwords and keys are stored encrypted in the
conguration le and by default are displayed in the encrypted form when the conguration is displayed. Enabling the service
obscure-passwords command displays asterisks instead of the encrypted passwords and keys. This command prevents a user from
reading these passwords and keys by obscuring this information with asterisks.
Password obscuring masks the password and keys for display only but does not change the contents of the le. The string of asterisks is
the same length as the encrypted string for that line of conguration. To verify that you have successfully obscured passwords and keys,
use the show running-config command or show startup-config command.
If you are using role-based access control (RBAC), only the system administrator and security administrator roles can enable the service
obscure-password command.
To enable the obscuring of passwords and keys, use the following command.
• Turn on the obscuring of passwords and keys in the conguration.
CONFIGURATION mode
service obscure-passwords
Example of Obscuring Password and Keys
Dell(config)# service obscure-passwords
Conguring Custom Privilege Levels
In addition to assigning privilege levels to the user, you can congure the privilege levels of commands so that they are visible in dierent
privilege levels.
Within the Dell Networking OS, commands have certain privilege levels. With the privilege command, you can change the default level
or you can reset their privilege level back to the default.
• Assign the launch keyword (for example, configure) for the keyword’s command mode.
• If you assign only the rst keyword to the privilege level, all commands beginning with that keyword are also assigned to the privilege
level. If you enter the entire command, the software assigns the privilege level to that command only.
To assign commands and passwords to a custom privilege level, use the following commands. You must be in privilege level 15.
1 Assign a user name and password.
CONFIGURATION mode
username name [access-class access-list-name] [privilege level] [nopassword | password
[encryption-type] password]
Congure the optional and required parameters:
• name: enter a text string (up to 63 characters).
• access-class access-list-name: enter the name of a congured IP ACL.
• privilege level: the range is from 0 to 15.
• nopassword: do not require the user to enter a password.
• encryption-type: enter 0 for plain text or 7 for encrypted text.
• password: enter a string.
2 Congure a password for privilege level.
CONFIGURATION mode
enable password [level level] [encryption-mode] password
Congure the optional and required parameters:
Security
921