Users Guide

4. Display the VLT proxy gateway configuration.
EXEC mode
Dell#show vlt-proxy-gateway
Configuring an LLDP VLT Proxy Gateway
You can configure a proxy gateway in a VLT domain to locally route packets destined to a L3 endpoint in
another VLT domain.
To configure an LLDP proxy gateway:
1. Enable VLT on a switch, then configure a VLT domain and enter VLT-Domain Configuration mode.
CONFIGURATION mode
Dell(conf)#vlt domain domain-id
2. Configure the LLDP proxy gateway.
VLT DOMAIN mode
Dell(conf-vlt-domain)#proxy-gateway lldp
3. You can configure the port channel interface for an LLDP proxy gateway and exclude a VLAN or a
range of VLANs from proxy routing. This parameter is for an LLDP proxy gateway configuration.
VLT DOMAIN PROXY GW LLDP mode
Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-channel interface
exclude-vlan vlan-range
4. Display the VLT proxy gateway configuration.
EXEC mode
Dell#show vlt-proxy-gateway
1050
VLT Proxy Gateway