Users Guide

buffer memory that can be accessed by multiple queues when the minimum guaranteed buffers for a
queue are consumed.
1. Configure the weight factor for computation of average-queue size. This weight value applies to
front-end and backplane ports.
QOS-POLICY-OUT mode
Dell(conf-qos-policy-out)#wred weight number
2. Configure one or more WRED profiles, and specify the threshold and maximum drop rate
WRED mode
Dell(conf-wred)#wred thresh-1
Dell(conf-wred)#threshold min 100 max 200 max-drop-rate 40
Dell(conf-wred)#wred thresh-2
Dell(conf-wred)#threshold min 300 max 400 max-drop-rate 80
3. Associate a service class for each WRED profile, and assign the WRED profile to specific queues on
backplane ports.
CONFIGURATION mode
Dell(conf)#service-class wred green queue5 thresh-1 queue7 thresh-2
backplane
Dell(conf)#service-class wred yellow queue1 thresh-2 queue3 thresh-1
backplane
Dell(conf)#service-class wred weight queue0 11 queue6 4 queue7 9 backplane
4. Create a global buffer pool that serves as a shared buffer accessed by multiple queues when the
minimum guaranteed buffers for a queue are consumed. The switch supports four global service-
pools in the egress direction.
mode
Dell(conf)#service-pool wred green pool0 thresh-1 pool1 thresh-2
Dell(conf)#service-pool wred yellow pool0 thresh-3 pool1 thresh-4
Dell(conf)#service-pool wred weight pool0 11 pool1 4
5. Enable ECN marking on specific queues on backplane ports with a service class.
CONFIGURATION mode
Dell(conf)#service-class wred ecn 0, 3-5, 7 backplane
868
Quality of Service (QoS)