White Papers

EXEC Privilege
• pe-id is a port-extender ID number from 0 to 255.
Dell# connect pe 254
Login: peadmin
Password: calvin
Displaying PE Status
To verify the operational status of a port extender attached to a C9010, enter any of the show commands in this section.
In the command output, online indicates that a port extender is up; offline indicates that a port extender is down.
Dell# show pe brief
-- Port Extenders Information --
----------------------------------------------------------
PE-id Status Stack-size Type System-MAC
----------------------------------------------------------
3 offline 1 C1048P a0:68:00:3f:92:bc
255 online 5 C1048P 6c:c0:00:43:11:11
Dell#show pe 3
Codes: A - Active, I - Inactive
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Offline Reason: UNP - Unit Not Present,
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
PE-ID assigned: 3
Status: offline
System Mac: a0:68:00:3f:92:bc
PE Up Time: 00:00:00
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 0/0(A)
Cascade LAG: Po 261(Up)
------------------------------------------------------------------------
Stack-id Status Reason Type UnitMac No. of Ports
------------------------------------------------------------------------
0 error SVM C1048P 00:00:00:00:00:00 52
Dell#show pe 10 statistics
PE-ID: 10
PE-CSP Tx Message: 4
PE-CSP Rx Message: 2
ECP Tx: 5
ECP Rx Ack: 5
ECP Dropped: 0
ECP Rx: 3
ECP Tx Ack: 3
ell#show pe 10 system brief
Stack MAC : a0:68:00:3f:92:bc
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
------------------------------------------------------------------------------------
0 Management online C1048P C1048P 9-9(0-5) 52
1 Member not present
2 Standby not present C1048P
3 Member not present C1048P
4 Member not present
740
Port Extenders (PEs)