White Papers
PE CONFIGURATION (BATCH mode)
cascade interface interface slot/port peer
Dell(conf-b-pe-1)# cascade interface TenGigabitEthernet 1/4 peer
Once the cascade interfaces are congured, the PE starts functioning in a dual homing setup as shown in the following diagram:
Figure 111. Standalone System and System with PE — After setting up Dual Homing
You can congure PE 1 from both System A and System B.
Systems without Port Extender
You can connect two standalone systems in a VLT domain and then connect a PE to the systems to setup a dual homed environment. In
the following illustration, System A and System B are standalone systems.
Figure 112. Systems without Port Extender— Before setting up Dual Homing
Port Extenders (PEs)
753