Installation and Service Manual

PowerEdge R750xs system overview
The PowerEdge R750xs system 2S, 2U system that supports:
● Up to two 3
rd
Generation Intel Xeon Scalable processors with up to 32 cores per processor.
● 16 DDR4 DIMM slot
● Two AC or DC power supply units
● 16 x 2.5-inch SAS/ SATA + 8 x 2.5-inch NVMe drives.
● 16 x 2.5-inch SAS/ SATA drives.
● 12 x 3.5-inch SAS/ SATA + 2 x 2.5-inch SAS/ SATA or NVMe rear drives.
● 8 x 2.5-inch SAS/ SATA drives.
● 8 x 2.5-inch NVMe drives.
● 8 x 3.5-inch SAS/ SATA drives.
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at https://www.dell.com/support > Browse all Products > Data Center Infrastructure >
Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals
and Documents.
NOTE: All instances of SAS, SATA and NVMe drives are referred to as drives in this document, unless specified otherwise.
NOTE: For more information, see the Dell EMC PowerEdge R750xs Technical Specifications on the product documentation
page.
Topics:
• Front view of the system
• Rear view of the system
• Inside the system
• System information label
• Rail sizing and rack compatibility matrix
• Locating the Express Service Code and Service Tag
Front view of the system
Figure 1. Front view of 16 x 2.5-inch SAS/SATA + 8 x 2.5-inch NVMe drive system
2
8 PowerEdge R750xs system overview