Technical Guide

Table Of Contents
Networking
Topics:
Overview
OCP 3.0 support
Overview
PowerEdge offers a wide variety of options to get information moving to and from our servers. Industry best technologies are
chosen, and systems management features are added by our partners to firmware to tie in with iDRAC. These adapters are
rigorously validated for worry-free, fully supported use in our servers.
The PowerEdge Server Adapter Matrix posted to our knowledge portal is the central repository for PowerEdge NIC, HBA and
HCA information. The matrix covers:
Part Numbers, Tied SKUs and Customer Kits
Server Compatibility & Support
Optics & Cable Support
Systems Management
Adapter Features
Spec Sheet Links
This document is updated as changes happen, so be sure to bookmark it rather than downloading an offline copy to stay with
the latest information.
NOTE: This is a direct download link to an .XLSX and may not open in a tab as expected depending on your browser.
OCP 3.0 support
Supported OCP cards
Table 8. Supported OCP
Form Factor Vendor Port type Port speed Port count
OCP 3.0 Intel SFP+ 10 GbE 2
OCP 3.0 Broadcom BT 1 GbE 4
OCP 3.0 Broadcom BT 10 GbE 2
OCP 3.0 Broadcom SFP28 25 GbE 2
OCP 3.0 Broadcom SFP28 25 GbE 4
OCP 3.0 Broadcom SFP+ 10 GbE 2
OCP 3.0 QLogic BT 10 GbE 2
OCP 3.0 QLogic SFP+ 10 GbE 2
OCP 3.0 QLogic SFP28 25 GbE 2
OCP 3.0 Intel BT 1 GbE 4
7
Networking 23