Users Guide

Setting Up the Dell Canvas 27 │ 29
Stand (Optional)
• Use a Phillips crosshead
screwdriver to tighten screws to
Dell Canvas 27.
• Remove the BarLock
• Follow the direction of the arrow
and press the riser latch to open
the stand.
• Follow the arrow-printing
indicator ( ) on the Dell
Canvas 27 back cover to place
the Dell Canvas 27 on the Stand.
NOTE: Ensure to place the Dell
Canvas 27 screen and the Stand
in an angle slightly less than 90
degrees to avoid the system falling
forward before it is secured.