Reference Guide

Default Null
cfgRhostsNtpServer3
Description Specifies the third of three possible NTP servers.
Legal Values A string representing a valid NTP server. For example,
ntp3.ntp.net. At least one NTP server must be specified
and duplicate entries are not allowed.
Default Null
cfgRhostsNtpMaxDist
Description Specifies the NTP maximum distance parameter used to
aid in NTP configuration.
Legal Values 1–128
Default 16
cfgRhostsSyslogEnable (Read/Write)
Description Enables or disables remote syslog to allow the RAC and
SEL logs to be written to up to three remote syslog
servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read/Write)
Description Remote syslog port number to use for writing the RAC and
SEL logs to a remote syslog server.
This setting takes effect only if the cfgRhostsSyslogEnable
parameter is set to 1 (enabled).
Legal Values 10–65535
NOTE: The following port numbers are reserved and
cannot be used: 21, 68, 69, 123, 161, 546, 801, 4096,
5988, 5989, 6900, 9000, 60106.
Default 514
107