Reference Guide

cfgChassisPower
This group is applicable only to CMC and contains parameters to display or configure power for the chassis.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option.
The following sections provide information about the objects in the cfgChassisPower group.
cfgChassisExternalPowerManagementMode
Description Allows to enable or disable External Power Management.
When this mode is enabled:
• The chassis power capacity is set to maximum
value.
• The server power priorities are set to 1.
• These properties cannot be changed by racadm
or GUI.
When the external power management mode is disabled,
the power capacity and server power priorities are
preserved.
Legal Values
Default
cfgChassisInPower (Read Only)
Description Indicates the cumulative input power consumption data (in Watt and BTU/hr)
captured from all healthy and functional PSUs in the chassis.
Legal Values None
Default None
cfgChassisPeakPower (Read Only)
Description The maximum system input power consumption (in Watt),
because the value was last cleared by a user.
Legal Values
Default
136