Reference Guide

• –vdkey:<VD FQDD>: The Virtual Drive to change the access to.

Example

racadm raid assignva:RAID.ChassisIntegrated.1-1-1 -

vdkey:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -accesspolicy

{ na | rw }

racadm raid assignva:RAID.ChassisIntegrated.1-1-2 -

vdkey:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -accesspolicy rw -

assignpolicy multiple

unblink

Description

Stops blinking or identifies an operation on the specified device.

Synopsis

racadm raid unblink:<PD FQDD>

racadm raid unblink:<VD FQDD>

racadm raid unblink {-pdkey:<comma separated PD FQDDs|-

vdkey:<comma separated VD FQDDs}

Input

• –pdkey: A comma-seperated list of physical disk drive FQDDs to use in the operation.

• –vdkey: A comma-seperated list of virtual drive FQDDs to use in the operation.

Example

racadm raid unblink:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1

racadm raid unblink:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

racadm raid unblink -pdkey:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1,Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1

racadm raid unblink -vdkey:Disk.Virtual.0:RAID.ChassisIntegrated.

1-1,Disk.Virtual.0:RAID.ChassisIntegrated.1-1

init

Description

Starts an initialization operation on the specified virtual drive.

Synopsis

racadm raid init:<VD FQDD> -speed {fast | full} {-current | -

pending}

Input

• –current <optional>: Performs the configuration right now.

NOTE: If this requires the system to reboot it will reboot then.

• –pending: Save the configuration change for a later application. You can use a combination

of the –pending and –current flags on multiple commands to reduce the possible number of

system reboots.

• –speed{fast | full}: Perform a fast or full (slow) initialization on the virtual drive.

Example

racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed

fast

racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed

full