White Papers

Diagnostics VRTX Chassis
racadm
The racadm command is the Administration & Configuration command line utility on a VRTX Chassis.
VRTX Chassis supports the following commands. Any help about a specific command can be obtained
by running the command.
racadm help <sub command> .
The syntax of the command is: racadm <command> <args>
List of supported Racadm Commands on VRTX Chassis is given here.
help -- list racadm subcommand description
help <subcommand> -- display usage summary for a subcommand
? -- list racadm subcommand description
? <subcommand> -- display usage summary for a subcommand
arp -- display the networking arp table
chassisaction -- execute power-up/down/cycle or reset operation
chassislog -- display the chassislog
closessn -- close a session
clrraclog -- clear the CMC log
clrsel -- clear the System Event Log (SEL)
cmcchangeover -- changes the redundant state of the CMC from active to
standby and vice versa
config -- modify CMC configuration properties
connect -- connect to switch or blade serial console
deploy -- deploy blade or IOM by specifying required properties
eventfilters -- configure alerts for chassis events
fanoffset -- override the fan speed for fan 1 - 6
feature -- display features active on the chassis / feature
deactivation
featurecard -- feature card status and list the available features
fwupdate -- update the firmware on a CMC, server, IOM inf, PERC, or
HDD
get -- save CMC Event Filter configuration to a file
getactiveerrors -- display CMC active errors
getassettag -- display asset tag
getchassisname -- get the chassisname
getconfig -- display CMC configuration properties
getdcinfo -- display general I/O module and DC configuration
information
getflexaddr -- display Flexaddress enablement status for all slots and
fabrics
getioinfo -- display general IO information and stack information
getled -- display the LED settings on a module
getmacaddress -- get MAC/WWN addresses
getmodinfo -- get module configuration and status information
getniccfg -- display network settings for modules
getpbinfo -- get power budget status information
getpciecfg -- display pcie slot/adapter information
getpminfo -- get power management status information
getraclog -- display the CMC log
getractime -- display the current CMC time
getredundancymode -- gets the redundancy mode of the CMC
getsel -- display records from the System Event Log (SEL)