White Papers

PowerEdge VRTX

9. Run the switch write command to update the firmware image.

10. Run the switch show bootvar command to verify the new image is selected for the next system

start.

11. If the new image is not active as shown earlier, run the switch boot system command to make it

active.

console#show bootvar

Image Filename Version Date Status

----- --------- --------- --------------------- -----------

1 image-1 1.0.0.51 13-Feb-2013 17:10:14 Active*

2 image-2 1.0.0.52 20-Feb-2013 18:41:53 Not active

"*" designates that the image was selected for the next boot

console#write

Overwrite file [startup-config].... (Y/N)[N] ?Y

01-Oct-2006 15:25:56 %COPY-I-FILECPY: Files Copy - source URL running-

config destination URL flash://startup-config

01-Oct-2006 15:26:05 %COPY-N-TRAP: The copy operation was completed

successfully

Copy succeeded

console#

console#boot system image