White Papers

PowerEdge VRTX
17
12. Run the switch reload command to restart the switch to load the new firmware image.
13. It may take a few minutes for the switch to complete the reset process. To verify whether or not
the switch is running the correct firmware image, run the CMC connect switch command to
attach to the switch.
14. Run the switch show version command to verify the firmware version.
console#reloa
d
This command will reset the whole system and disconnect your current
session.
Do you want to continue ? (Y/N)[N] Y
Shutting down ...
Shutting down ...
Resetting local unit
Shutting down ...
**************************************************
***************** SYSTEM RESET *****************
**************************************************
mii4: link is down
mii4: link is up, 100 FDX
$ connect switch
connect: acquiring remote port.
Connected to remote port.
Escape character is '^\'.
User Name:root
Password:calvin
console#show version
SW version 1.0.0.52 ( date 20-Feb-2013 time 17:10:14 )
Boot version 1.0.0.9 ( date 21-Jan-2013 time 15:19:49 )
HW version 00.00.00