Users Guide

Status information on the LCD includes descriptive information about the modules in the chassis. The tables in this
section describe the information that is displayed for each component.
LCD Module and Server Status Information
The tables in this section describe status items that are displayed on the front panel LCD for each type of component in
the chassis.
Table 34. CMC Status
Item Description
Example: CMC1, CMC2 Name/Location.
No Errors If no error occurs then “No Errors” is displayed, else lists
error messages.
Firmware Version Only displays on an active CMC. Displays Standby for the
standby CMC.
IP4 <enabled, disabled> Displays current IPv4 enabled state only on an active
CMC.
IP4 Address: <address, acquiring> Only displays if IPv4 is enabled only on an active CMC.
IP6 <enabled, disabled> Displays current IPv6 enabled state only on an active
CMC.
IP6 Local Address: <address> Only displays if IPv6 is enabled only on an active CMC.
IP6 Global Address: <address> Only displays if IPv6 is enabled only on an active CMC.
Table 35. Chassis or Enclosure Status
Item Description
User Define Name Example: “Dell Rack System”. This is settable via CMC CLI
or Web GUI.
Error Messages If no errors occur then No Errors is displayed; otherwise
error messages are listed, critical errors first, then
warnings.
Model Number Example "PowerEdgeM1000".
Power Consumption Current power consumption in watts.
Peak Power Peak power consumed in watts.
Minimum Power Minimum power consumed in watts.
Ambient Temperature Current ambient temperature in degrees Celsius.
Service Tag The factory-assigned service tag.
CMC redundancy mode Non-Redundant or Redundant.
PSU redundancy mode Non-Redundant, AC Redundant, or DC Redundant.
185