Users Guide

• Health and Performance, and Properties — Displays the active, critical, and non-critical events as displayed by

the hardware logs and the performance data that vary with time.

• Properties — Displays the component properties that do not vary with time, or that change only infrequently.

• Quick Links — Provides links to navigate to the most frequently accessed pages, and also the most frequently

performed actions. Only links applicable to the selected component are displayed in this section.

Viewing Server Model Name and Service Tag

You can view the model name and service tag of each server instantly using the following steps:

1. In the left pane, click Server Overview. All the servers (SLOT-01 to SLOT-04) appear in the servers list. If a server is

not present in a slot, the corresponding image in the graphic is grayed out.

2. Pause the cursor over the slot name or slot number of a server. A tool tip is displayed with the server’s model name

and service tag (if available).

Viewing Chassis Summary

To view the chassis summary information, in the left pane, click Chassis Overview → Properties → Summary.

The Chassis Summary page is displayed. For more information about this page, see the

Online Help

Viewing Chassis Controller Information and Status

To view the chassis controller information and status, in the CMC Web interface, click Chassis Overview →

Chassis Controller.

The Chassis Controller Status page is displayed. For more information, see the

Online Help

Viewing Information and Health Status of All Servers

To view the health status of all the servers, do one of the following:

• Click Chassis Overview. The Chassis Health page displays a graphical overview of all the servers installed in the

chassis. Server health status is indicated by the overlay of the server subgraphic. For more information about

the chassis health, see the

Online Help

• Click Chassis Overview → Server Overview. The Servers Status page provides an overview of the servers in the

chassis. For more information, see the

Online Help

Viewing Information and Health Status of the IOM

To view health status of the IOMs, in the CMC Web interface, do any of the following:

1. Click Chassis Overview .

The Chassis Health page is displayed. The graphics in the left pane displays the rear, front, and side view of the

chassis and contains the health status for the IOM. IOM health status is indicated by the overlay of the IOM sub-

graphic. Move the cursor over the individual IOM sub-graphic. The text hint provides additional information about

that IOM. Click the IOM sub-graphic to view the IOM information in the right pane.

2. Go to Chassis Overview → I/O Module Overview .

The I/O Module Status page provides an overview of IOM associated with the chassis. For more information, see

the

Online Help