Users Guide

3. To use a server’s host name as slot name, select the Use Host Name for the Slot name option. This overrides the

static slot names with the server’s Host Name (or system name), if available. This requires the OMSA agent to be

installed on the server. For more information about the OMSA agent, see the

Dell OpenManage Server

Administrator User's Guide

available at dell.com/support/manuals.

4. To save the settings, click Apply.

To restore the default slot name (SLOT-01 through SLOT-4) on the basis of a server's slot position) to a server, click

Restore Default Value.

Configuring iDRAC Network Settings

To use this feature, you must have an Enterprise License. You can configure the iDRAC network configuration setting of

a server. You can use the QuickDeploy settings to configure the default iDRAC network configuration settings and root

password for severs that are installed later. These default settings are the iDRAC QuickDeploy settings.

For more information about iDRAC, see the

iDRAC7 User’s Guide

at dell.com/support/manuals.

Configuring iDRAC QuickDeploy Network Settings

Use the QuickDeploy Settings to configure the network settings for newly inserted servers.

To enable and set the iDRAC QuickDeploy settings:

1. In the left pane, click Server Overview → Setup → iDRAC .

2. On the Deploy iDRAC page, in the QuickDeploy Settings section, specify the settings mentioned in the following

table. For more information about the fields, see the

Online Help

Table 8. QuickDeploy Settings

Setting Description

QuickDeploy Enabled Select the option to enable the QuickDeploy feature that

automatically applies the iDRAC settings configured on

this page to the newly inserted servers. The auto

configuration must be confirmed locally on the LCD

panel.

Set iDRAC Root Password on Server Insertion Select the option to change iDRAC root password to

match the value provided in the iDRAC Root Password

field, when a server is inserted.

iDRAC Root Password When the Set iDRAC Root Password on Server Insertion

and QuickDeploy Enabled options are selected, this

password value is assigned to a server's iDRAC root

user password when the server is inserted into a

chassis. The password can have 1 to 20 printable

(including white spaces) characters.

Confirm iDRAC Root Password Allows you to retype the password provided in the

Password field.

Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By default,

this option is cleared.

Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default, this

option is selected.