White Papers

4 Using VRTX KVM and DVD
The KVM can be enabled for a particular slot by using the following command.
$ racadm config -g cfgkvminfo -o cfgKvmSlot3Enable 1
Object value modified successfully
The KVM can be disabled for a particular slot using the following command.
$ racadm config -g cfgkvminfo -o cfgKvmSlot1Enable 0
Object value modified successfully
KVM Configuration from GUI
To view the KVM properties from the CMC Web interface, click Chassis Overview > Front Panel.
KVM properties Figure 1.
To change the KVM configuration from the CMC Web interface, click Front Panel, click Setup,
change the configuration, and then click Apply.