Command Line Reference Guide

ManualsBrandsDell ManualsComputersChassis Management Controller Version 1.0 for PowerEdge VRTX

101

102

103

104

105

106

107

108

109

110

Example:

racadm getconfig -g cfgLanNetworking

cfgNicEnable=1

cfgNicIPv4Enable=1

cfgNicIpAddress=192.168.22.101

cfgNicNetmask=255.255.255.0

cfgNicGateway=192.168.22.101

cfgNicUseDhcp=1

# cfgNicMacAddress=00:00:00:00:00:01

cfgNicVLanEnable=0

cfgNicVLanID=1

cfgNicVLanPriority=0

cfgDNSServersFromDHCP=1

cfgDNSServer1=192.168.0.5

cfgDNSServer2=192.168.0.6

cfgDNSRacName=cmc-frankly

cfgDNSDomainName=fwad.lab

cfgDNSDomainNameFromDHCP=1

cfgDNSRegisterRac=1

cfgDNSServersFromDHCP (Read/Write)

Description Specifies if the DNS server IPv4 addresses should be

assigned from the DHCP server on the network.

For CMC, this property is used only if cfgNicUseDhcp is

set to 1 (true).

Legal Values

• 1 (TRUE)

• 0 (FALSE)

Default 0

cfgDNSServer1 (Read/Write)

Description Specifies the IPv4 address for DNS server 1. This property

is only valid if cfgDNSServersFromDHCP is set to 0

(FALSE).

NOTE: cfgDNSServer1 and cfgDNSServer2 may be

set to identical values while swapping addresses.

Legal Values String representing a valid IPv4 address. For example:

192.168.0.20.

Default 0.0.0.0

103