Command Line Reference Guide
chassisaction
Description Executes a power action on the chassis or a server.
To use this subcommand, you must have the Chassis
Control Administrator privilege.
Synopsis
racadm chassisaction [-m <module>]
<action>
Input
• -m <
module
> — Module on which you want to
carry out the action. Values are:
– chassis - this is the default value, if -m is
not specified.
– switch-n, where n=1
• <
action
> — Action that you want to execute on
the specified module. Values are:
– powerdown — (Chassis only) Turns off
the chassis.
– powerup — (Chassis only) Turns on the
chassis.
– powercycle — Power cycles the module.
– nongraceshutdown — (Chassis only)
Non-gracefully turns off the chassis.
– reset — Performs a hard reset of the
module.
When <
module
> = switch, <
action
> must be powercycle
or reset.
Output None
Example Perform a reset of switch-1:
racadm chassisaction -m switch-1 reset
Module power operation successful.
closessn
Description Closes a communication session on the device. Use the
getssninfo command to view a list of sessions that
can be closed using this command.
To use this subcommand, you must have the Administrator
privilege.
Synopsis
• racadm closessn –i <session id>
• racadm closessn -a
• racadm closessn -u <username>
Input
• -i<
session id
> — The session ID of the session to
be ended, which can be retrieved using RACADM
getssninfo subcommand.
24