Command Line Reference Guide

This command is an optimized version and displays all disk objects for the enclosure FQDD.

racadm raid get pdisks --refkey <enclosure/Backplanes

FQDDs separated by comma > -o -p <property names separated by comma>

optimized and filtered version.

• Monitor and Inventory all Fans connected to the enclosure

racadm raid get fans --refkey <enclosure FQDDs separated

by comma>

This command displays all fan keys connected to the enclosures referred as refkeys.

racadm raid get fans --refkey <enclosure FQDDs separated

by comma

> -o optimized version.

This command displays all fan objects for the enclosure FQDD.

racadm raid get fans --refkey <enclosure FQDDs separated

by comma > -o -p <property names separated by comma> optimized and

filtered version.

• Monitor and Inventory all EMMs connected to the enclosure

racadm raid get emms -refkeys <enclosure FQDDs separated

by comma>

This command will return all EMM keys connected to the enclosures being mentioned as refkeys.

racadm raid get emms -refkeys <enclosure FQDDs separated

by comma > -o

This command is an optimized version and displays all EMM objects for the enclosure FQDD.

racadm raid get emms -refkeys <enclosure FQDDs separated

by comma > -o -p <property names separated by comma>

This command is an optimized and filtered version.

• Monitor and Inventory all Temperature Probes connected to the enclosure

racadm raid get tempprobes -refkeys <enclosure FQDDs

separated by comma

This command displays all temperature probe keys connected to the enclosures being mentioned as refkeys.

racadm raid get tempprobes -refkeys <enclosure FQDDs

separated by comma > -o

This command is an optimized version and displays all temperature probe objects for the enclosure FQDD.

racadm raid get tempprobes -refkeys <enclosure FQDDs

separated by comma > -o -p <property names separated by comma>

optimized and filtered version

• Monitor and Inventory all Power Supply Units connected to the enclosure

racadm raid get psus --refkey <enclosure FQDDs separated

by comma>

This command displays all power supply units connected to the enclosures being mentioned as refkeys.

racadm raid get psus --refkey <enclosure FQDDs separated

by comma > -o

This command is an optimized version and displays all power supply units objects for the enclosure FQDD.

racadm raid get psus --refkey <enclosure FQDD's separated

by comma

> -o -p <property names separated by comma>

This command is an optimized and filtered version.