Command Line Reference Guide

• <

enabled

> — Sets whether the server's host name is used for display

purposes. Valid values: 0 or 1.

Example

• Set the name of slot 3 as server3:

racadm setslotname -i 3 server3

• Enable system to display host names (1=Active):

racadm setslotname -h 1

setsysinfo

Description Sets the name or location of the chassis.

To use this subcommand, you must have the Administrator

privilege.

Synopsis

racadm setsysinfo [-c chassisname|

chassislocation]

Input

• <

string

> — Indicates a maximum of 64 non-

extended ASCII chassis name or location.

• -c — Sets the chassis name or location.

Example

racadm setsysinfo -c chassisname "Dell

Rack System"

The chassis name was set successfully.

SSH or Telnet RACADM

racadm getconfig -g <groupname> [-o <objectname>]

[-i <indexnumber>]

racadm <subcommand>

Example

racadm getconfig -g idracinfo

racadm getsysinfo

sshpkauth

Description Enables you to upload and manage up to four different

SSH public keys per user. You can upload a key file or key

text, view keys, or delete keys.

This command has three mutually exclusive modes—

upload, view, and delete that are determined by the

options.

Upload

The upload mode allows you to upload a keyfile or to copy

the key text on the command line. You cannot upload and

copy a key at the same time.