Messages Reference Guide

ManualsBrandsDell ManualsComputersChassis Management Controller Version 1.0 for PowerEdge VRTX

101

102

103

104

105

106

107

108

109

110

Detailed

Description

This happens during promotion of extended storage feature from single CMC to dual CMC. If

the media on Standby CMC is not healthy, this message is displayed and the feature returns to

single CMC state.

Recommended

Response Action

Do one of the following, and retry the operation: 1) In the CMC Web interface, go to Chassis

Controller > Flash Media > Configuration and verify if the card on the secondary CMC displays

some errors. 2) Do a failover and then reprovision the card from the same GUI page.

Reprovisioning is only allowed on the card of primary CMC. However, if both the options 1 and

2 fail, the card may be no longer functional.

Category Audit

SubCategory CMC = Chassis Management Controller

Severity Severity 1 (Critical)

Trap/EventID 8689

LCD Message No LCD message display defined.

Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE

CMC8511

Message Unable to synchronize the data in the Extended Storage removable flash media in the primary

and secondary CMCs.

Detailed

Description

The data on the Extended Storage removable flash media SD cards is not synchronized when

the CMC is unable to determine which card has the latest data.