Manualshelf

Messages Reference Guide

ManualsBrandsDell ManualsComputersChassis Management Controller Version 1.0 for PowerEdge VRTX
361362363364365366367368369370
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM0004
Message Memory device at location
arg1
is disabled.
Arguments
•
arg1 =
location
Detailed
Description
The memory may not be seated correctly, misconfigured, or has failed. Memory size is
reduced.
Recommended
Response Action
Re-install the memory component. Review product documentation for supported memory
configurations. If the problem continues, contact support.
Category System Health
SubCategory MEM = Memory
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM0020
Message Memory device at location
arg1
is enabled.
Arguments
•
arg1 =
location
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
SubCategory MEM = Memory
367