Messages Reference Guide

Category System Health
SubCategory AMP = Amperage
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message System level current is outside of range. Contact Support
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
AMP0314
Message System level current is greater than the upper warning threshold.
Detailed
Description
Product documentation contains information on correct configuration. The failure could also
be caused by a faulty component or related cabling. System performance may be degraded.
Recommended
Response Action
Review system power policy, check system logs for power related failures, and review system
configuration changes.
Category System Health
SubCategory AMP = Amperage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
AMP0315
Message System level current is greater than the upper critical threshold.
Detailed
Description
Product documentation contains information on correct configuration. The failure could also
be caused by a faulty component or related cabling. System performance may be degraded.
Recommended
Response Action
Review system power policy, check system logs for power related failures, and review system
configuration changes.
Category System Health
SubCategory AMP = Amperage
Severity Severity 1 (Critical)
54