Messages Reference Guide

PWR8567
Message Unable to turn off Server
arg1 on a power cycle action.
Arguments
•
arg1 =
server number
Detailed
Description
Unable to turn off the Server on a power cycle operation. This happens if the Server did not
show a "power off" status change within the expected time.
Recommended
Response Action
The Server could have taken more time to turn off than expected. If the Server is turned off,
turn on to complete the power cycle. If the Server has not completed a power cycle, retry the
operation.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8568
Message Server
arg1 did not gracefully shutdown before the timer expired.
Arguments
•
arg1 =
slot number
Detailed
Description
The server identified in the message did not gracefully shutdown before the CMC shutdown
timer expired. This happens if the server did not show power off status change within 60
seconds after the operation was initiated, or if the OS in the server has not successfully
shutdown.
Recommended
Response Action
Check if the OS in the server identified in the message has successfully shutdown, if not,
manually complete the shutdown or wait for the shutdown to complete normally. If the issue
persists, perform a forced power down of the server identified in the message.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
580