Messages Reference Guide

ManualsBrandsDell ManualsComputersChassis Management Controller Version 1.0 for PowerEdge VRTX

591

592

593

594

595

596

597

598

599

600

PWR8591

Message Servers are turned off to allocate power to the newly inserted hard disk drives.

Detailed

Description

Before inserting hard disk drives, always make sure the Chassis has enough available power.

Otherwise operating servers may be turned off.

Recommended

Response Action

Make sure there is enough power supply to distribute power. Go to, the Chassis Overview >

Power > Power Budget Status. In the Total Input Power Available For Allocation field, view the

available power. To add more power, insert more PSUs or remove unused components from

the chassis.

Category Audit

SubCategory PWR = Power Usage

Severity Severity 1 (Critical)

Trap/EventID 8417

LCD Message No LCD message display defined.

Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE

PWR8592

Message Chassis Management Controller is unable to turn on or turn off the chassis because another

chassis power operation is in progress.

Detailed

Description

The request to turn on or turn off the chassis was issued before the previous power operation

was completed.