Messages Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC042
Message Invalid number of input parameters.
Detailed
Description
The number of input parameters provided is not valid to perform the operation.
Recommended
Response Action
Verify that all required parameters are provided. Refer to the Lifecycle Controller-Remote
Services documentation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC043
Message Unable to update some event filter settings.
Detailed
Description
Some event filter settings were not updated due to problems encountered processing the input
parameters.
Recommended
Response Action
Verify the input parameters provided and retry the operation. Refer to the Lifecycle Controller-
Remote Services documentation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
621