Messages Reference Guide

SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8546
Message Unable to update the Standby CMC firmware.
Detailed
Description
The firmware update operation of the Standby CMC was not successful.
Recommended
Response Action
Retry the update operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8547
Message Unable to update the Standby CMC firmware. The Image transfer process was not successful.
Detailed
Description
The firmware update operation of Standby CMC was not successful. The firmware image could
not be transferred.
Recommended
Response Action
Make sure that the CMC firmware image file is available at the location specified in the
operation, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
809