Owner's Manual

224 Using the iKVM Module
To update the iKVM firmware using RACADM, open a Telnet/SSH text
console to the CMC, log in, and type:
racadm fwupdate -g -u -a <
TFTP server IP address > -d
<
filepath/filename > -m kvm
For example:
racadm fwupdate -gua 192.168.0.10 -d ikvm.bin -m kvm
For more information about the fwupdate subcommand, see "fwupdate" on
page 272.
Troubleshooting
NOTE: If you have an active console redirection session and a lower resolution
monitor is connected to the iKVM, the server console resolution may reset if the
server is selected on the local console. If the server is running a Linux operating
system, an X11 console may not be viewable on the local monitor. Pressing
<Ctrl><Alt><F1> at the iKVM will switch Linux to a text console.