Owner's Manual

RACADM Subcommands 265
Example
• racadm arp
Address HWtype HWaddress Flags
Mask Iface
143.166.152.3 ether 00:07:84:A7:CE:BC C
eth0
143.166.152.2 ether 00:07:84:7B:9F:FC C
eth0
143.166.152.1 ether 00:00:0C:07:AC:0A
C eth0
143.166.152.113 ether 00:15:C5:48:9C:1D C
eth0
chassisaction
NOTE: To use this subcommand, you must have Chassis Control Administrator
privilege.
Description
Executes a power action on the chassis, iKVM, or a server.
Usage
racadm chassisaction [-m < module >] < action >
Options
Table A-1 describes chassisaction subcommand options.
Table A-1. chassisaction Subcommand Options
Option Description
-m <module> Specifies the module on which you want the action carried out.
<module> may be one of the following:
• chassis
• switch- n where n =1–6
•
kvm