Owner's Manual

RACADM Subcommands 273
NOTE: Wait for the file to finish transferring from the TFTP server before you check
the status of the update.
Example
• racadm fwupdate -g -u -a 192.168.0.120 -d
firmimg.cmc -m cmc-active
Firmware update complete.
• racadm fwupdate -s -m cmc-active
Firmware update in progress.
getassettag
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the asset tag for the chassis.
Usage
racadm getassettag [-m < module >]
Options
Table A-6 describes the getassettag subcommand options.
-a <IP address> Specifies the TFTP server IP address used for the firmware image
(used with -g).
-m <module> Specifies the module to be updated. <module> is one of the
following values:
• cmc-active (default)
•
cmc-standby
• kvm
• server- n where n = 1–16
-s Displays the current status of the firmware update.
Table A-5. fwupdate Subcommand Options (continued)
Option Description