Owner's Manual

352 CMC Property Database Group and Object Definitions
cfgEnclosureMaxPowerLimit
Indicates the maximum power consumption limit (in watts) for the entire
chassis.
Configuration range: 2768–7928 watts
Default: [null]
cfgChassisEnablePerformanceDegradation
Enables or disables the CMC to siphon power from lower priority servers
when power is needed for the entire chassis. In this case, the servers are
allowed to continue operating at a degraded performance level rather than
shut down. Configuration options: 0 (disabled), 1 (enabled). Default: 1
# cfgChassisPowerLowWaterMark
Read only. The minimum system level AC power consumption value (in
watts) over the time since the value was last cleared.
# cfgChassisPowerHighWaterMark
Read only. The maximum system level AC power consumption (in watts)
since the value was last cleared by a user.
# cfgChassisPowerLowWaterMarkTime
Read only. The timestamp recorded when the minimum system power
consumption occurred.
# cfgChassisPowerHighMarkTime
Read only. The timestamp recorded when the peak system power
consumption value occurred.
# cfgChassisPowerWaterMarkTimeClear
Write only. To reset cfgChassisPowerLowWaterMark and
cfgChassisPowerHighWaterMark, set this object to 1.
# cfgChassisPowerWaterMarkTimeClearTime
Read only.