Owner's Manual

Contents 5
Using a Telnet Console With the CMC . . . . . . . . . 53
Using SSH With the CMC
. . . . . . . . . . . . . . . . 54
Enabling SSH on the CMC
. . . . . . . . . . . . . 54
Changing the SSH Port
. . . . . . . . . . . . . . . 54
Enabling the Front Panel to iKVM Connection
. . . 55
Configuring Terminal Emulation Software
. . . . . . . 55
Configuring Linux Minicom for Serial Console Emulation
56
Configuring Linux for Serial Console Redirection During Boot
58
Enabling Login to the Console After Boot
. . . . . 60
Using a Serial or Telnet Console
. . . . . . . . . . . . 63
Connecting to Modules With the Connect Command
. . 63
4 Using the RACADM Command Line Interface 65
Using a Serial or Telnet Console . . . . . . . . . . . . 66
Logging in to the CMC
. . . . . . . . . . . . . . . 66
Starting a Text Console
. . . . . . . . . . . . . . . 66
Using RACADM
. . . . . . . . . . . . . . . . . . . . . 66
RACADM Subcommands
. . . . . . . . . . . . . . 67
Accessing RACADM Remotely
. . . . . . . . . . . 70
Enabling and Disabling the RACADM Remote Capability
71
Using RACADM Remotely
. . . . . . . . . . . . . 71
RACADM Error Messages
. . . . . . . . . . . . . 72
Using RACADM to Configure the CMC
. . . . . . . . . 72
Configuring CMC Network Properties
. . . . . . . . . 72
Setting Up Initial Access to the CMC
. . . . . . . . 72
Viewing Current Network Settings
. . . . . . . . . 73
Configuring the Network LAN Settings
. . . . . . . 74
Configuring the Network Security Settings
. . . . 77