Owner's Manual

90 Using the CMC Web Interface
Viewing Power Budget Status
The Power Budget Status page displays the power budget status for the
chassis, servers, and chassis power supply units (PSUs).
For instructions on viewing power budget status, see "Viewing Power Budget
Status" on page 185. For more information about CMC power management,
see "Power Management" on page 175.
Viewing the Health Status of All Servers
The Servers Status page provides overviews of the servers in the chassis.
To view health status for all servers:
1
Log in to the CMC Web interface.
2 Select Servers in the system tree. The Servers Status page appears.
Table 5-1 provides descriptions of the information provided on the Servers
Status page.
Table 5-1. All Servers Status Information
Item Description
Slot # Displays the location of the server. The slot number is a sequential
number that identifies the server by its location within the chassis.
Present Indicates whether the server is present in the slot (Present or Absent).
When the server is absent, the health, power state, and service tag
information of the server is unknown (not displayed).
Health OK Indicates that the server is present and
communicating with the CMC.
Informational Displays information about the server when no
change in health status has occurred.
Warning Indicates that only warning alerts have been
issued, and corrective action must be taken
within the time frame set by the administrator.
If corrective actions are not taken within the
administrator-specified time, critical or severe
failures that can affect the integrity of the device
could occur.