Owner's Manual

Using the CMC Web Interface 91
Editing Slot Names
The Slot Names page allows you to update slot names in the chassis. Slot
names are used to identify individual servers. When choosing slot names, the
following rules apply:
• Names may contain only printable ASCII characters (ASCII codes 32
through 126), excluding the double quote (
" , ASCII 34).
• Slot names must be unique within the chassis. No two slots may have the
same name.
• Strings are not case-sensitive.
Server-1 , server-1 , and SERVER-1
are equivalent names.
• Slot names must not begin with the following strings:
• Switch-
• Fan-
• PS-
• KVM
• DRAC-
Health
(continued)
Severe Indicates at least one Failure alert has been
issued. Severe status represents a system failure
on the server, and corrective action must be
taken immediately.
No Value When the server is absent from the slot, health
information is not provided.
Name Indicates the name of the server, which by default is identified by its
slot name (SLOT-01 to SLOT-16).
NOTE: You can change the server name from the default. For
instructions, see "Editing Slot Names".
Power State Indicates the power status of the system: On, Off, or N/A (Absent).
Service Tag Displays the service tag for the server. The service tag a unique
identifier provided by the manufacturer for support and maintenance.
If the server is absent, this field is empty.
Table 5-1. All Servers Status Information (continued)
Item Description