User's Manual

Using the CMC Web Interface 143
Use the following steps to display a FlexAddress status overview for each
server module:
1
Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 87).
2 Click Servers in the system tree. Click the Properties tab, FlexAddress sub-
tab.
3 The FlexAddress Summary page is displayed. This page allows you to view
the WWN configuration and MAC addresses for all slots in the chassis.
The status page presents the following information:
4 For additional information, review the online help page by clicking the
Help link and review "Using FlexAddress" on page 151.
Viewing Server FlexAddress Status
FlexAddress status information can also be displayed for each individual
server. The server level information displays a FlexAddress status overview for
that blade.
Fabric Configuration Fabric A, Fabric B, and Fabric C display
the type of the Input/Output fabric
installed.
WWN/MAC Addresses Displays FlexAddress configuration for
each slot in the chassis. Information
displayed includes:
• Slot number and location
• Whether FlexAddress is enabled
• Fabric type
• Server-assigned and chassis-assigned
WWN/MAC addresses.
A green check mark indicates the active
address type, either server-assigned or
chassis-assigned.