User's Manual

296 RACADM Subcommands
Usage
racadm featurecard -s
Options
Table A-7 describes the featurecard subcommand options.
Example
racadm featurecard -s
• racadm featurecard -s
The feature card inserted is valid and contains
the following feature(s) FlexAddress: The feature
card is bound to this chassis
fwupdate
NOTE: To use this subcommand, you must have Chassis Configuration
Administrator privilege.
Description
Updates the firmware on the active CMC, standby CMC, or iKVM. Also
performs updates to iDRAC firmware when the existing firmware is
corrupted.
NOTE: Running the fwupdate subcommand to update the firmware on the primary
CMC causes all Telnet and Web connections to be dropped. To monitor the progress
of the update, use the -s option. During update of all other modules, including the
standby CMC, the primary CMC continues to run normally without resetting.
NOTE: The fwupdate subcommand may only be executed on one device at a time.
Table A-7. featurecard Subcommand Options
Option Description
-s Lists active SD card features and SD card status.