User's Manual

Using the CMC Web Interface 97
Viewing the iKVM Status
The local access KVM module for your Dell M1000e server chassis is called
the Avocent
®
Integrated KVM Switch Module, or iKVM.
For instructions on viewing iKVM status and setting properties for the iKVM,
see:
• "Viewing the iKVM Status and Properties" on page 244
• "Enabling or Disabling the Front Panel" on page 243
• "Enabling the Dell CMC Console via iKVM" on page 243
• "Updating the iKVM Firmware" on page 245
For more information about iKVM, see "Using the iKVM Module" on
page 225.
Viewing the Health Status of the PSUs
The Power Supply Status page displays the status and readings of the PSUs
associated with the chassis. For more information about CMC power
management, see "Power Management" on page 197.
Severe Indicates at least one Failure alert has been
issued. Severe status represents a system
failure on the IOM, and corrective action must
be taken immediately to prevent overheating
and system shutdown.
Unknown Displayed when the chassis is first powered on.
In the event of a communication failure
between the CMC and the fan unit, the CMC
cannot obtain or display health status for the
fan unit.
Name Displays the fan name in the format FAN-n, where n is the fan
number.
Speed Indicates the speed of the fan in revolutions per minute (RPM).
Table 5-4. Fans Health Status Information (continued)
Item Description